The CB290 Start
Kit is recommended for 1st timer users of CUBLOC who need the maximum number of digital inputs/outputs.
-
The CB290 Start
Kit comes with a proto board which has a prototyping area for the user to solder peripherals and test before going into production with industrial boards such as the CuBASE 64M.
-
Start Kit
consists of : CUBLOC core module CB290 + CB290 Proto-Board + RS232 serial cable
+ DC Jack + User's Manual
(A power supply
is NOT included with this kit) (Required Power:
9~30V DC power supply w/ > 200mA)
[CB290] - Ideal for apps requiring large number of I/O ports. -
Ideal for apps requiring RTC (Real Time Clock) and data memory back-up during power-down.Ideal for apps requiring large data memory. (e.g. Modbus RTU Master mode) -
Ideal for small to mass production (1 to 1000+),
Embeddable in customized PCB - MODBUS ASCII (Master & Slave Mode)
Support - MODBUS RTU (Master & Slave Mode) Support - External Peripherals CuNET (I2C)
included. - External Peripherals SPI
included. - Develop using CublocStudio in BASIC and/or Ladder Logic Language.
Processor
CUBLOC CB290
Microprocessor
Atmega128 @ 18.432Mhz
Program Memory (Flash)
80KB
Data Memory (RAM)
24KB(BASIC)
+
4KB(Ladder Logic)
EEPROM
4KB
EEPROM
Program Speed
36,000/sec
General Purpose I/O
91 I/O lines (5V TTL) (33
input only + 32 output only + 26 input/output configurable)
Serial Ports for Communication
-
2 High-speed hardware-independent serial ports -
Configurable Baud rates: 2400bps to 230,400 bps
- 1 User Configurable Timer -
Configurable Interval Units = 10ms
Data Memory Back-up
Yes, a rechargable Super-Capacitor or Battery may be connected. (The *CB290 Proto-Board and **CuBASE64M comes with Super-Capacitor included on-board)
Operating Temperature
-40 °C to 120 °C
Package
108-pin
Module
Size
2.4"L x 1.9"W x
0.5"H (59.4 x
47.8 x 13 mm)
* The 0.1F super-capacitor on the CB290 Proto-Board will back up the data memory of the CB290 module for a
period of approximately 24 hours during power-down.
** The 1.0F super-capacitor on the CuBASE64M will back up the data memory of the CB290 module for a
period of approximately 10 days during power-down.
For longer duration of backup period, please
use a battery or a super-capacitor with larger capacity (e.g. A
10F super-capacitor will last you ~100 days or 3 months, a battery can extend
this period to 1 to 10 years depending on the capacity of the battery used)
){kind=small}
