The CT1721 Start Kit is
recommended for 1st timer users of CuTOUCH™ who want to get started quickly.
The Start Kit comes with the CT1721, RCABLES, RS232 serial
cable, User's Manual, Mounting Brackets, and a CuTOUCH™ Software Developement
CD.
ALL-IN-ONE Touch Panel Industrial Controller
BASIC and Ladder Logic Controller, Graphic LCD, and Touch Panel are
fused into one product, CuTOUCH™. Replace
outdated PLC, push-buttons, small LCD combo with 1 single
CuTOUCH™.
OR repleace over-priced Touch-screen HMI + PLC combo with 1 single CuTOUCH™.
With BASIC
language, you can create custom graphics and process touch input. With Ladder
Logic, real-time I/O and sequential processing can easily be implemented into
your final product.
With 82
I/Os and 2 RS232 hardware independent ports, there is plenty of room for
interfacing with various peripherals.
To top it
off, CuTOUCH™ supports MODBUS protocol
to interface with other PLCs, HMIs, and PCs.
Graphics
can easily be implemented using CuCANVAS™, a graphic program in which you can create boxes,
circles, and lines just like a paint program. A source code will be generated
for you so you don't have to code anything. Pixel Studio™ is another graphic program in which you can create up to 200 custom characters easily.
You can download our programs by going to "Download > Integrated"
under our Homepage.
|
 Dual
Processor Atmega128: First Processor is dedicated to Touch screen and
graphic LCD control, Second Processor is dedicated to Basic and Ladder Logic
Multi-tasking.
Opto-isolated 24V DC & TTL 5V inputs
24V DC NPN TR & TTL 5V outputs
Replace
outdated buttons, LCDs, industrial controllers with one single ALL-integrated
CuTOUCH.
Ideal for apps requiring RTC (Real
Time Clock) and data memory back-up during power-down.
Ideal for apps requiring large data
memory. (e.g. Modbus RTU Master
Ideal for small to mass production (1
to 1000+), Mountable on custom steel enclosures.
MODBUS Supported
SPI & I2C Protocol Supported
Use Ladder Logic and BASIC to program the unit.
Automatic source-code generation for
graphics.
|
|
Processor
|
CuTOUCH™
CT1721
|
|
Microprocessor
|
Dual Core Atmega128 @ 18.432Mhz
|
|
Program Memory (Flash)
|
80KB
|
|
Data Memory (RAM)
|
24KB(BASIC)+4KB(Ladder Logic)
|
|
EEPROM
|
4KB
EEPROM
|
|
BASIC Execution Speed
|
36,000/sec
|
|
Ladder Scan Time
|
10ms
(Turbo-mode: 100usec)
|
|
General Purpose I/O
|
- 82
total I/O lines (TTL & 24V DC)
(1 TTL input, 32 24V DC opto-isolated
inputs + 32 24V DC TR outputs + 17 TTL 5V input/output
configurable)
|
|
Serial Ports for Communication
|
- 2
High-speed hardware-independent serial ports (Channel 0 & 1 : RS232C 12V)
- Configurable Baud rates: 2400bps to 230,400
bps
|
|
Analog Inputs
|
8
channel 10-bit ADCs
Configurable Voltage: 0 to 5V OR 0 to
10V
|
|
Analog Outputs
|
- 6
Channel 16-bit PWM or DAC
- Output Voltage Range: 0 to 5V
- Configurable
Frequencies: 35hz to 1.15Mhz
|
|
External Interrupts
|
4
Channels
|
|
High Speed Counters
|
2 Channel 16-bit
Counters
(up to 2Mhz - 2,000,000 pulses/sec)
|
|
Power
|
-
Required Power: 24V DC
- Current
Consumption w/ ports unloaded:
CT1720
Current Consumption
@ 24V w/ Backlight ON: 170mA
@ 24V w/
Backlight OFF: 70mA
|
|
RTC (Real Time Clock)
|
Yes
|
|
Timers
|
- 1 User Configurable Timer
- Configurable Interval
Units = 10ms
|
|
Data Memory Back-up
|
*Yes,
a 1 Fahrad rechargable Super-Capacitor is included.
|
|
Operating Temperature
|
0 °C
to 70 °C
|
|
Package
|
Integrated Touch-screen Panel w/ 2mm Headers and
2.5mm RCABLE Headers
|
|
Size
|
- 7.17" x 5.17" x 0.98" (182.2 x 131.4 x 25 mm)
-
Viewing Area (Touch-sesitive):
4.5" x 3.4" (5.6"
diagonal)
|
* The 1.0F
rechargable super-capacitor on the CuTOUCH™ will back up the
data memory of the CuTOUCH™ module for a period of approximately 10 days during
power-down.
For longer
duration of backup period, please use a battery or a super-capacitor with larger
capacity (e.g. A 10F super-capacitor will last you ~100 days or 3 months, a
battery can extend this period to 1 to 10 years depending on the
capacity of the battery used)
I/O Connectors
and Brackets are included for metal panel mounting.
For connector
info, please refer to Product->ETC->Connectors on our
homepage.
|
){kind=small}
